Transfer Position

Design Specification of Dead Plate

We recommend to adopt above 5mm thick carbon steel, stainless steel or high hardness alloy steel etc as the material for manufacturing dead plate. It is important to take account of the each gap of the transfer position, to make the loading products pass through the transfer position smoothly.

Please refer to the Basic Dimension  in Design Specification chapter to get value C, and refer to the Floating Gap in this chapter to get value G, and then use the formula below, the calculation result will be the actual dimension of floating gap.

Design Specification of Side Transfer

Generally, the 90 degree transfer application is in common use of the integral conveyance procedure. We recommend you to adopt EASECON turning belt; it can make you use the space flexibly.

If the factory space is not big enough for the minimum turning radius of EASECON  turning belt, it is necessary to adopt side transfer design in the frame to solve this problem.

怡旭鋼工業股份有限公司

EASECON INDUSTRIAL CO., LTD.©  2008